5 Tips You Should Know For Painting Concrete in San Jose, CA
When you have concrete in or about your home, it’s entirely possible that you are going to want to leave it in its natural state — unpainted — and that’s perfectly fine if that’s your thing.
Many people like to have the option to have their concrete painted, however, and if you want to do so, it is rather important that you take the time to learn a little about the process as well as the sort of equipment you might need in order to do it well.
With that being the case, here are five tips you should know for painting concrete in San Jose, CA.
1. Remove Oil And Grease Or Be Left With Stained Paint
When you are looking at painting concrete, whether this is concrete that is found on the interior of your house or the exterior, one thing you have to be on the lookout for is oil and grease stains — these are the sorts of things that you cannot just leave alone prior to painting.
If you do try to do so, you will ultimately find yourself with a discolored and unpleasant stained looking paint job.
The thing you need to do is to use trisodium phosphate to take care of that stain — following the directions on the particular bottle that you get, you can treat the oil or grease stain and then make sure that you will no longer have to worry about it.
2. Patch Cracks Before You Paint
Cracks in the concrete can happen over time — and that’s fine, but if you’re going to be painting the concrete, they can cause a massive problem.
What you need to do prior to painting is to patch the cracks — there are specific compounds that you can get and mix up and then apply to fill in the cracks such that they do not cause a problem with the smoothness of your concrete painting work.
3. Seal Concrete Before Painting
You’re going to want to seal the concrete that you will paint, and the reason for this is chiefly due to the the fact that concrete is an extremely porous material and, as such, is prone to taking in water.
If you don’t seal the concrete before you paint it, you also risk the possibility that you are going to get some pretty bad mold growth on your concrete — and once you have mold, it’s extremely difficult to get rid of it as it is an insidious thing that can spread quite quickly.
It may be a bit of an investment upfront to get the sealant that you will need to seal the concrete, but it is well worth it.
4. Always Allow A Coat To Dry Before Applying Another
Though it may seem like it’s intuitive and does not need to be mentioned, you should absolutely make sure to allow the coat of whatever it is to fully dry before you apply another coat of it.
In the case of painting concrete, you will often need to allow your coats of paint to dry overnight to make sure that it is fully dry.
That being the case, you are going to need to plan out your paint job well in advance, especially if you are painting outdoors, to account for such thing as bad weather.
5. Thin And Even Coats Over Thick And Fewer Coats
When you are looking to paint your concrete, the key is to apply thin coats and to apply said coats evenly — and to make sure that you apply at least two if not three coats of paint.
The alternative, which is considerably worse, is to try to apply fewer coats but to apply thicker coats — this is bad painting practice in general — it will lead to painting problems galore.
If you need help with your interior painting, get in touch with us. Marvelous Painters serves companies and residents in San Mateo, Dublin, San Ramon, Gilroy, Los Gatos, Palo Alto, San Francisco, San Jose, and all around the Bay Area on all their painting needs and then some. Call us at (408) 489-7202 today!