2020-11-06 Marvelous Painters Los Gatos CA Varnishing Stairs

5 Tips For Varnishing Your Wooden Stairs in Los Gatos, CA

When you have a set of wooden stairs in your home, there’s one thing that will set them apart from average stairs — if you are hoping to make them look more splendid, that is to say.

That one thing is the act of varnishing the stairs — and taking the time to varnish your wooden stairs properly will make them last longer and stand up better to the kind of scuffs and stains that can come with time.

With that being the case, here are five tips for varnishing your wooden stairs in Los Gatos, CA.

1. Don’t Shake The Can

The varnish is not paint, and it’s not stain either — it’s more of a protective layer that goes over the wooden surface.

The varnish that will be applied to your stairs needs to be mixed before being applied to them, and there are better and worse ways of doing this.

Specifically, you do not want to shake the can to mix it — for doing so will introduce bubbles into the varnish, and you do not want that.

2. Make Time To Varnish

A lot of people don’t realize that the varnishing process can take quite a long time to do, and a large part of that is just waiting for the varnish to dry.

The important thing that you have to remember is that even in the best of ventilating situations, it is better to be out of the room while it dries.

As this is the case, you have to make sure that you have a good plan for varnishing your steps, including knowing when you’re going to be actually varnishing and when you’ll be taking time away to allow them to dry.

3. Sand First

One of the preparation process parts is in sanding the stairs to get them ready to be varnished.

Some might suggest that this part is entirely unnecessary and can be skipped, but this is not so — for sometimes wooden stairs have old varnish that needs to be removed before the stairs are properly varnished.

Even if the stairs don’t have any varnish on them, it’s better to sand them to get them ready to be properly varnished.

4. Clean And Dry

Before you even think about starting to varnish your stairs, you need to make sure they are fully clean and dry.

This is important because if you don’t do this, you’re going to first and foremost risk that any dirt or other things don’t end up in the varnish, as it is nearly impossible to remove once it becomes embedded.

Better to prevent it from getting embedded there in the first place by not allowing it to be there — and then allowing your wooden stairs to fully dry before varnishing your wooden steps.

After all, you wouldn’t want to try varnishing partially moist wooden stairs.

5. Wear Protective Gear When Chemically Stripping Old Varnish

If you find yourself in a situation where you need to remove the old varnish before applying new varnish, it is best to wear protective gear while doing so.

This is because some of the stronger chemical treatments for removing varnish can be quite powerful and can be quite damaging if they come into direct contact with bare skin.

Do yourself a favor and even if you are working in a well-ventilated area, make sure that you are wearing protective gloves and protective glasses to make sure that you do not get hurt by the very things you are using to improve the look of your wooden stairs.

If you need help with your interior painting, get in touch with us. Marvelous Painters serves companies and residents in San Mateo, Dublin, San Ramon, Gilroy, Los Gatos, Palo Alto, San Francisco, San Jose, and all around the Bay Area their painting needs and then some. Call us at (408) 489-7202 today!

0
Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

©2018 Marvelous Painters | All All Rights Reserved | Privacy Policy |
By Top Floor Marketing